Horizontal Display Fridge VF1000D with Straight Glass Front – Cold Cuts, Dairy and Vacuum-Packed Meat, 300 × 90 × 125 cm, +2/+8 °C, Static Cooling

The 300 cm VF1000D is the first configuration in the range with three doors giving access to the storage compartment. At this length, the display fridge is no longer just display furniture — it becomes part of the store's internal logistics: stock sits beneath the displayed goods and can be reached from three points.

VF1000D or VF1000? The difference is the glass

The two ranges are the same display fridge: the same 300 × 90 × 125 cm, the same 55 cm usable depth, the same refrigeration unit, the same equipment. Only the glass front differs. VF1000D has a straight glass front, VF1000 has a curved glass front.

Choose the straight front when you want a modern, understated look that aligns cleanly with the counter or the rest of the furniture; when you value quick cleaning on a flat surface with no hard-to-reach areas; or when you want products to be seen exactly as they are, without the distortion that a curved surface inevitably introduces. Choose the curved front when a wide viewing angle from the aisle and the classic grocery-section look matter more to you.

The top surface used as display space

Being flat, the straight glass front gives you a usable surface right on top of the display fridge. Many retailers use it for lightweight impulse products — sweets, confectionery, chewing gum, small items — right where customers are already waiting in line. In practice, you gain an extra linear metre of display space without occupying a single additional centimetre of floor area.

The surface is intended for lightweight goods, not as a worktop or support for heavy loads.

The product range you can display

• Cold cuts, salamis, ham, processed meat products, whole or sliced
• Packaged cheeses and dairy products
• Vacuum-packed or supplier-pre-packaged meat
• Salads, semi-prepared dishes, ready-made packaged meals and other products stored at +2/+8 °C

What falls outside its scope: fresh unwrapped meat, minced meat, offal, unwrapped poultry, fish on ice, frozen products. These are product categories that require humidity control and stricter temperature thresholds than a static display fridge at +2/+8 °C can permanently guarantee. For these, request a quote for a butcher's display fridge.

Natural convection, no fan inside the cabinet

The cold air produced by the evaporator descends over the merchandise because it is denser than warm air; the warmed air rises back towards the evaporator and the cycle repeats on its own. There is no forced ventilation inside the display area — the only fan in the unit cools the refrigeration unit's condenser. For sliced cold cuts and cheeses, the absence of a continuous airflow means produce that does not dry out on the surface.

The digital thermostat displays the cabinet temperature and controls the refrigeration unit cycles. Defrosting is automatic and static.

The under-counter stock compartment

Beneath the display area is a storage compartment measuring 294 × 55 × 25 cm — the same depth as the display area, 6 cm shorter than the display fridge. On the 300 cm model, access is via 3 doors. Keep current-shift stock there and restock the display fridge without a trip to the back store.

Materials and equipment

• Food-grade stainless steel interior — chemically neutral, no transfer of taste or odour, resistant to professional detergents.
• Tempered straight glass front — flat surface, easy to wipe, also acting as a thermal barrier.
• 20 cm deep interior shelf for sliced and portioned products.
• LED lighting with accurate colour rendering of food products, without adding heat inside the cabinet.
• Built-in refrigeration unit with R290 — plugs into a standard socket.
• Adjustable feet — for levelling and raising the unit by approximately 5 cm.

Dimensions and placement

• Length: 300 cm · Width: 90 cm · Height: 125 cm (adjustable up to ~130 cm)
• Usable display depth: 55 cm · Interior shelf: 20 cm
• Storage compartment: 294 × 55 × 25 cm, 3 access doors
• Power supply: 220–240 V / 50 Hz · Energy class C

Allow a minimum of 10 cm clearance at the rear and sides for condenser ventilation. Avoid direct sunlight, heat sources and draughts from access doors or air conditioning units.

From delivery to operation

The display fridge arrives ready for use. After transport, leave it in an upright position for several hours before switching it on for the first time, then level it using the adjustable feet. Maintenance: clean with neutral detergents, periodically check the condenser and the defrost water drain. Full instructions.

Available lengths

VF1000D is manufactured from 100 to 400 cm, with the same width and the same adjustable height. The access doors to the storage compartment follow the length: 1 door from 100 to 150 cm, 2 doors from 170 to 250 cm, 3 doors from 300 to 350 cm, 4 doors at 400 cm. View the full range.

Weight, warranty and delivery

The display fridge weighs approximately 200 kg, so unloading and positioning in the store requires two people. Check the access route in advance: door widths, any thresholds and manoeuvring space at corners.

12-month warranty. If a fault occurs during the warranty period, we ship the replacement part directly to the buyer so that the display fridge can be returned to service quickly, without transporting the equipment to a service centre. Full terms are in the warranty terms and conditions.

MODACO, manufacturer since 1992

We manufacture commercial display fridges in Găești, Dâmbovița County. Made to order in 7–10 working days, delivery throughout Romania, invoicing for businesses, listing on SEAP, long-term spare parts availability. +40 727 324 787.