Horizontal Display Fridge VF1000D with Straight Glass – Cold Cuts, Dairy and Vacuum-Packed Meat, 200 × 90 × 125 cm, +2/+8 °C, Static Cooling

Display fridge VF1000D at 200 cm is the configuration for high-traffic stores: two metres of continuous display at +2/+8 °C, with a straight front, 194 cm of buffer storage underneath and two doors giving access to the storage compartment.

VF1000D or VF1000? The difference is the glass

The two series are the same display fridge: the same 200 × 90 × 125 cm, the same 55 cm useful depth, the same refrigeration unit, the same specification. Only the glass front differs. VF1000D has straight glass, VF1000 has curved glass.

Choose the straight front when you want a modern, understated line that aligns cleanly with the counter or the rest of your furniture; when you value quick cleaning across a flat surface with no hard-to-reach areas; or when you want products to be seen exactly as they are, without the distortion that a curved surface inevitably introduces. Choose the curved front when a wide viewing angle from the aisle and the classic deli-counter look matter more to you.

The top surface used as display space

Being flat, the straight glass gives you a usable surface directly on top of the display fridge. Many retailers use it for lightweight impulse products — confectionery, sweets, chewing gum, small items — right in the area where customers are already queuing. In practice, you gain an extra linear metre of display space without occupying a single additional centimetre of floor space.

The surface is intended for lightweight merchandise, not as a worktop or a support for heavy loads.

Products you can display

• Cold cuts, salami, ham, processed meat products, whole or sliced
• Packaged cheeses and dairy products
• Vacuum-packed or supplier-pre-packaged meat
• Salads, semi-prepared dishes, ready-made packaged meals and other products kept at +2/+8 °C

What falls outside its scope: fresh unpackaged meat, minced meat, offal, unpackaged poultry, fish on ice, frozen products. These are categories that require humidity control and stricter temperature thresholds than a static display fridge at +2/+8 °C can permanently guarantee. For these, request a quote for a butcher shop display fridge.

Natural convection, no fan inside the cabinet

The cold air produced by the evaporator descends over the merchandise because it is denser than warm air; the warmed air rises back towards the evaporator and the cycle repeats on its own. There is no forced ventilation inside the display area — the unit's only fan cools the condenser of the refrigeration unit. For sliced cold cuts and cheeses, the absence of a constant airflow means products that do not dry out on the surface.

The digital thermostat displays the cabinet temperature and controls the refrigeration unit cycles. Defrosting is automatic and static.

The under-counter storage compartment

Below the display area there is a storage space of 194 × 55 × 25 cm — the same depth as the display area, 6 cm shorter than the display fridge. On the 200 cm model, access is through 2 doors. Keep your stock for the current shift there and restock the display fridge without a trip to the back room.

Materials and specification

• Food-grade stainless steel interior — chemically neutral, no transfer of taste or odour, resistant to professional cleaning agents.
• Tempered straight glass at the front — flat surface, easy to wipe down, also acting as a thermal barrier.
• 20 cm deep interior shelf for sliced and portioned products.
• LED lighting with accurate colour rendering of food products, with no heat input into the cabinet.
• Built-in refrigeration unit with R290 — plugs into a standard socket.
• Adjustable feet — for levelling and raising the unit by approximately 5 cm.

Dimensions and placement

• Length: 200 cm · Width: 90 cm · Height: 125 cm (adjustable up to ~130 cm)
• Useful display depth: 55 cm · Interior shelf: 20 cm
• Storage compartment: 194 × 55 × 25 cm, 2 access doors
• Power supply: 220–240 V / 50 Hz · Energy class C

Allow a minimum of 10 cm of clear space at the rear and sides for condenser ventilation. Avoid direct sunlight, heat sources and draughts from access doors or air conditioning units.

From delivery to operation

The display fridge arrives ready to use. After transport, leave it upright for a few hours before the first start-up, then level it using the feet. Maintenance: clean with neutral detergents, periodically check the condenser and the defrost water drain. Full instructions.

Available lengths

VF1000D is manufactured from 100 to 400 cm, with the same width and the same adjustable height. The access doors to the storage compartment follow the length: 1 door from 100 to 150 cm, 2 doors from 170 to 250 cm, 3 doors from 300 to 350 cm, 4 doors at 400 cm. View the full range.

Weight, warranty and delivery

The display fridge weighs approximately 100 kg, so unloading and positioning in the store requires two people. Check the access route in advance: door widths, any thresholds and manoeuvring space at corners.

12-month warranty. If a fault occurs during the warranty period, we dispatch the replacement part directly to the buyer so that the display fridge can be put back into operation quickly, without shipping the unit to a service centre. Full terms are set out in the warranty terms and conditions.

MODACO, manufacturer since 1992

We manufacture commercial display fridges in Găești, Dâmbovița County. Made-to-order production in 7–10 working days, delivery throughout Romania, invoicing for companies, listing on SEAP, long-term spare parts availability. +40 727 324 787.